Procurement guideFinance & payments

OUR vs SHA vs BEN: The Wire Transfer Charge Codes That Decide Who Pays the Banks

What SWIFT field 71A actually says about OUR, SHA and BEN, the ISO 20022 names DEBT, SHAR and CRED, what each option costs on published fee schedules, and the checklist that keeps a supplier paid in full.

Share LinkedIn X

Introduction

When an international wire arrives short, it is rarely a mistake. It is usually the charge code on the payment instruction. Every SWIFT customer payment carries a three-letter code in field 71A, 'Details of Charges', that decides who pays the fees charged by the banks along the route: OUR, SHA or BEN.

Most banks default to SHA. That single default is why a supplier tells you the invoice arrived under the amount you sent, and why a finance team reconciling a year of payments finds deductions nobody can explain. This guide sets out what each code actually says in the SWIFT standard, the ISO 20022 names now appearing on bank forms, what each option costs using published fee schedules, and the checklist that keeps a supplier paid in full.

General information, not financial or legal advice. Banks apply these codes differently, so confirm the current terms with your own provider before relying on them.

1. What OUR, SHA and BEN Actually Say

The SWIFT standard defines the three codes by who bears the transaction charges, and the wording is narrower than the plain-English labels suggest.

Banks describe the same three options to customers in plainer terms: under OUR the sending customer bears the remittance amount, bank charges and all other banks' fees; under BEN the beneficiary bears the charges of the banks engaged in the transfer (AfrAsia Bank, standard information requirements for international transfers, 28 March 2024).

  • OUR — 'Our customer charged': All transaction charges are to be borne by the ordering customer — you. Your bank's fee plus every other bank's fee on the route.
  • SHA — 'Shared charges': All transaction charges other than those of the financial institution servicing the ordering customer's account are borne by the beneficiary customer. In practice: your own bank's fee is yours, and every other charge is taken out of the amount in transit.
  • BEN — 'Beneficiary': All transaction charges are to be borne by the beneficiary customer — the supplier, including your bank's fee.
  • Why the wording matters: SHA does not mean the two sides split the bill evenly, and BEN does not mean the supplier is asked to pay afterwards. Both put other banks' charges inside the payment, so the amount that lands is smaller than the amount you sent.

2. The ISO 20022 Names: DEBT, SHAR and CRED

Banks are moving from the SWIFT MT103 message to ISO 20022 (pacs.008), where the same decision sits in a field called Charge Bearer with three values: DEBT, SHAR and CRED. They map directly — DEBT to OUR, SHAR to SHA, CRED to BEN (Flywire help centre, updated 22 July 2026).

Some banks still show OUR/SHA/BEN on payment forms while others show DEBT/SHAR/CRED. If your bank only offers the second set, it is the same choice under different names: if you want the supplier paid in full and the form offers DEBT, DEBT is what you instruct.

  • OUR = DEBT: You pay every charge; the supplier should receive the full amount.
  • SHA = SHAR: Your bank's charge is yours; other banks' charges are deducted in transit.
  • BEN = CRED: The supplier pays every charge out of the payment.

3. Why Wires Arrive Short

International payments often pass through one or more correspondent (intermediary) banks before reaching the supplier's bank, and each can take a fee. HSBC's business price list states that incoming payments 'may be subject to charges by the sender or intermediary banks', deducted before the money arrives.

Under SHA those deductions land on the supplier, which is the usual reason an invoice is reported short. Under OUR your bank is meant to cover them — but OUR reduces short payments rather than guaranteeing none, for two reasons.

  • Banks price OUR differently: Some charge a fixed extra fee; others pass on whatever the other banks actually claim. HSBC says it will 'apply a charge to your account for any charges claimed by intermediaries and/or the recipient's bank' — so an OUR payment can come back with a second charge after the transfer.
  • The code is not always honoured: Euro Pacific Bank notes that in the US market there is no certainty OUR will be applied by all intermediaries, because some domestic clearing systems do not specify a charge option and may treat the payment as SHA. That bank does not offer OUR on outgoing USD wires at all, and reserves the right to amend its OUR charge if correspondent claims deviate substantially.
  • Receiving fees stack: The supplier's own bank may charge to receive or convert the payment whichever code was used.
  • Reconcile: Compare the amount you sent with the amount the supplier received on every new route, and log which bank took what.

4. What Each Option Costs

The charge code decides who pays, not how much. The full cost of a supplier payment has three parts, and field 71A only touches the third.

  • The FX margin: The gap between the rate you are given and the mid-market rate — usually the largest part, and rarely shown as a separate line. With both rates quoted as supplier currency per one unit of your currency, margin % = (1 − your rate ÷ mid-market rate) × 100.
  • The transfer fee: HSBC UK charges £17 per international payment in Business Internet Banking, £30 by phone or branch to another bank and £40 by post (Business Price List dated 15 December 2025). NatWest charges £15 online or in the app and £25 in branch, plus an agent fee of £12 where it applies (fee change notice effective from 1 September 2026). Wise Business charges a one-off £50 set-up fee and sending fees that vary by currency from 0.24% of the amount (pricing page viewed 12 November 2026).
  • The charges along the route: Fixed correspondent fees, a fixed OUR uplift, or a pass-through of actual claims — ask which your bank uses.
  • Compare on total cost: A £15 transfer fee with a 2% margin costs about £215 on a £10,000 payment, while a 0.5% all-in price costs £50. For context, the World Bank's Remittance Prices Worldwide put the global average cost of sending $200 at 6.36% in Q3 2025 — small personal transfers, not business invoices, but it shows how much of a payment's cost can sit inside the rate. The Financial Stability Board's G20 targets, set in October 2021, aim for retail cross-border payments to cost no more than 1% on average by the end of 2027 with no corridor above 3%; they are goals, not price caps.

5. When the Code Is Not Your Choice

On some routes the law or the scheme decides, and instructing a different code will not change it.

  • Domestic UK payments: Where both the payer's and the payee's payment service providers are in the United Kingdom, regulation 66(2) of the Payment Services Regulations 2017 requires the payee to pay any charges levied by its own provider and the payer to pay its own. That is SHA by law — OUR and BEN are not options.
  • Euro payments across the UK and EEA: Regulation 66(2A) applies the same rule to a payment in euro executed under a payment scheme operating across the qualifying area, which regulation 66(4) defines as the United Kingdom and the EEA states, where both providers are in the UK.
  • Local rails beat charge codes: Paying in the supplier's own currency over a local rail (SEPA, Faster Payments, ACH, EFT, NPP) usually avoids correspondent banks altogether, so there is no intermediary charge to allocate.
  • UK high-value timing: CHAPS is the sterling same-day system used for high-value and time-critical payments, usually open from 6am to 6pm Monday to Friday excluding bank or public holidays in England and Wales (Bank of England).

6. How to Make Sure Your Supplier Is Paid in Full

Work through these before the first payment on a new route.

  • Put it in the contract: State who bears bank charges and which charge code will be used, so a short payment is a breach rather than an argument.
  • Instruct the code explicitly: Do not rely on a bank default. If the form offers DEBT/SHAR/CRED instead, DEBT is the OUR instruction.
  • Ask how OUR is priced: Fixed uplift or pass-through of actual claims — and whether it can be billed after the payment has gone.
  • Prefer the supplier's currency on a local rail: It removes the correspondent chain, the FX margin on your side, and most of the charge-code question.
  • Get the all-in number: Transfer fee plus FX margin plus expected route charges, quoted at the same moment as the rate.
  • Reconcile every new route: Compare amount sent with amount received, log the deduction and the bank, and re-check the supplier's receiving fee if it recurs.
  • Send a clean remittance advice: Quote the payment reference and the charge code so the supplier's bank can trace a deduction.

7. Questions to Ask Your Bank

Ask these before you choose who pays your suppliers.

  • Corridor: Which charge codes can you send on this route, and which do you apply by default?
  • OUR pricing: Is it a fixed fee or a pass-through of intermediary and recipient claims, and can it be charged after the transfer?
  • Full amount: Will the beneficiary receive the invoice amount in full, and what has actually been deducted on this route?
  • Margin: What is your margin over the mid-market rate for this currency pair and amount?
  • Rail: Can you pay in the supplier's currency over a local scheme instead of correspondent banks?
  • Authorisation: For any non-bank provider, check the exact company on the FCA Register. In the UK every non-bank payment provider must be authorised or registered, and safeguarding requirements differ by type (Financial Conduct Authority).

Sources

Facts checked against these sources on . Rules and prices change; confirm the current version before you contract.

  1. SWIFT MT103 field 71A (Details of Charges): BEN, SHA and OUR definitions — message field reference
  2. AfrAsia Bank Mauritius, Standard information requirements for international transfers (28 March 2024)
  3. Flywire Help, What do OUR/DEBT, BEN/CRED and SHA/SHAR mean in the fees section? (updated 22 July 2026)
  4. Euro Pacific Bank, Outgoing wire transfer fee types — SWIFT Field 71A charging instructions (updated 17 June 2026)
  5. HSBC UK, Business Price List (15 December 2025), international payments and charges
  6. HSBC, OUR, SHA and BEN charge options for UK–EU payments (2021)
  7. NatWest, Changes to CHAPS and international payment fees (from 1 September 2026)
  8. legislation.gov.uk, Payment Services Regulations 2017, regulation 66 (charges)
  9. Bank of England, CHAPS
  10. Wise, Business pricing (viewed 12 November 2026)
  11. World Bank, Remittance Prices Worldwide, Q3 2025 report
  12. Financial Stability Board, Targets for addressing the four challenges of cross-border payments (October 2021)
  13. Financial Conduct Authority, Using payment service providers

Pillar 01

Vanilla Traceability & the EUDR

Pillar 02

Vanilla Commodity Market Cycles

Pillar 03

De-risking Transoceanic Agricultural Cargo

Pillar 04

2026 Commercial Vanilla Bean Price per Kg

Pillar 05

Wholesale Vanilla Sourcing: CIF Landed Costs vs FOB Origin Pricing Explained

Pillar 06

Where to Buy Vanilla Beans in the UK

Pillar 07

Madagascar Vanilla: Origins, Grades and What to Check

Special Report · Trade Data

Global Vanilla Trade Flows & Market Outlook

Special Report · Climate Risk

Madagascar Cyclone Exposure & Vanilla Supply Risk (2026–2027)

Special Report · Price History

The 25-Year Vanilla Supercycle

Special Report · Origin Intelligence

Uganda Vanilla: The Second Origin Report

Special Report · Origin Intelligence

Beyond Madagascar & Uganda: Indonesia, Papua New Guinea and Tahiti

Special Report · Quality Standards

Vanilla Grades & Quality Standards Explained

Special Report · Procurement

Direct-from-Origin Vanilla Procurement: Bypassing Secondary Brokers

Procurement guide

Deconstructing a B2B Copper Quote

Procurement guide

Lithium Carbonate vs Hydroxide

Procurement guide

Crude Oil Freight Spreads

Procurement guide

Decoding Cocoa Premium Invoices

Procurement guide

Sourcing Bulk Cacao vs Wholesale Cocoa

Procurement guide

Deconstructing a Bulk Yellow Maize Quote

Procurement guide

Breaking Down a Wheat Export Quote

Procurement guide

Reading a Rice Export Quote

Procurement guide

Auditing Urea and DAP Fertilizer Invoices

Procurement guide

The Cheapest Way to Pay Overseas Suppliers

Procurement guide

Letter of Credit Costs Explained

Procurement guide

Cargo Insurance: What It Costs and Who Pays

Procurement guide

Hedging Commodity Prices for Smaller Buyers

Procurement guide

Buying Gold and Silver: Spot Price vs Dealer Premium